EUROPEAN JOURNAL OF SUSTAINABLE DEVELOPMENT RESEARCH

Keyword: biomass

5 results found.

Review Article
Agricultural Biomass to Adipic Acid–An Industrially Important Chemical
European Journal of Sustainable Development Research, 2022, 6(2), em0184, https://doi.org/10.21601/ejosdr/11904
ABSTRACT: Adipic acid is widely used in the production of nylon, plasticizers, polyurethane resins, adhesives, lubricants, etc. and hence the compound annual growth rate of adipic acid is expected to be 4.4% with a market size of over USD 7,000 million. At present adipic acid is commercially manufactured using petrochemical feedstock like benzene, hexane, hexene, hexanone, etc. using nitric acid as the catalyst. The research community is exploring newer methodologies to synthesize adipic acid and other industrially valuable chemicals using renewable feedstock one of them being biomass. There are mainly two routes of synthesizing adipic acid from biomass–chemocatalytic and biological. Within these routes, there are a variety of processes like deoxydehydrogenation (DODH), hydrodeoxygenation, direct synthesis via oxidation-hydrogenation that help convert biomass to adipic acid. With heterogeneous catalysis as a developing domain, researchers have developed a variety of catalysts like zeolites, silica-based catalysts, biological catalysts, deep utectic solvents as catalysts and a variety of other heterogeneous catalysts that convert that biomass containing cellulose, hemicellulose, lignin, other sugars to adipic acid efficiently. The paper reviews all the methodologies, catalysts for conversion and market demand of adipic acid.
Review Article
Trends in Sonochemical and Hydrodynamic Reactor Strategies for Catalytic Production of Biodiesel: Effects of the Influencing Process Parameters and Kinetics
European Journal of Sustainable Development Research, 2021, 5(3), em0164, https://doi.org/10.21601/ejosdr/11002
ABSTRACT: Biodiesel researchers need to understand the optimal conditions involved in the production of biodiesel from readily available biological sources, as several research works have reported on biodiesel production. Therefore, this paper emphasizes specifically, the process parameters involved in biodiesel production and how they affect biodiesel yields. These parameters include, but not limited to the feedstock selection, catalyst type to use, free fatty acid, temperature, kinetics, hydrodynamics and reactor conditions. In biodiesel synthesis, a high fatty acid methyl ester yield of up to 100%w/w at 60 oC has been reported, which occurred with a methanol to oil molar ratio of 3.75, and 60 min reaction time. Homogeneous catalysts seems promising for the production of biodiesel, although they possess disposal challenges and reusability issues. In addition, carbon-based catalysts from natural sources have been used to resolve the presence of free fatty acids in biodiesel synthesis that results in the formation of soap. These carbon-derived catalysts prove their efficiency when modified with acids. The reactor suitable for biodiesel reaction, assume several configurations, like the batch, fixed bed and semi-batch configurations, with their respective reaction conditions. Furthermore, in the design of a hydrodynamic cavitation reactor operating on the rotor-stator mechanism, research has shown that the ratio of rotor to stator diameter Dr/Ds is maintained at 0.73 for efficient operation. Hence, a proper understanding of the process chemistry and techniques involved in biodiesel synthesis would ensure a high desired yield and sustainable process route.
Review Article
Selected Thermo-Chemical Biorefining: Evaluation of the Current Trends and Progressions
European Journal of Sustainable Development Research, 2021, 5(2), em0154, https://doi.org/10.21601/ejosdr/10812
ABSTRACT: The review paper embodies the current trends and advancements involved in the transformation of biomass to enhanced products, bioenergy, and chemicals. Some selected chemical process like the slow-fast pyrolysis, catalytic fast pyrolysis, hydrothermal liquefaction, transesterification and lignin valorization by depolymerization are aptly suited for biorefinery processing, and were discussed in this review. The (catalytic) fast pyrolysis and hydrothermal liquefaction are quite similar, but differ in their feedstock preparations, reactor configuration and thermal or energy optimization. The review covers the biomass selection, chemical conversion techniques and most importantly the required heterogeneous catalysts (where applicable). The work further suggests the superiority of dedicated chemicals over drop-in and smart drop-in chemicals, due the complete usage of biomass. Relative to the oil refinery process, biorefining is quite novel and accompanied by its drawbacks. These challenges range from catalyst poisoning and deactivation to energy intensiveness and eventually as being cost-ineffective. The challenge encountered in biorefinery is in the economic feasibility, as it is inferred from this review that the pre-treatment process takes up to about 20% of the conversion cost. Although the biorefinery plant employ lignocellulosic biomass, but study shows that the use of biomass is largely under-utilized. The solid products/ wastes from pyrolysis for example, can be utilized as source of energy for the process. In the pursuit for sustainability, it is essential to ensure a balance-energy-mix, where every other type of energy will have a role to play to avoid dependence on only one solution for the future. Therefore, in contrast to the dwindling fossil fuels, it can be generally speculated that the future for biorefining is bright. It was concluded that with vast knowledge on the suitable heterogeneous catalysts and proper optimization of process parameters (temperatures, pressure, and reactant species); some of the biorefining processes will result into a significant increase in industrial fuels and bio-based drop-in chemicals leading towards commercialization.
Research Article
Evaluation of Luffa Cylindrica Fibers in A Biomass Packed Bed for The Treatment of Paint Industry Effluent Before Environmental Release
European Journal of Sustainable Development Research, 2020, 4(4), em0132, https://doi.org/10.29333/ejosdr/8302
ABSTRACT: The aim of this study was to investigate the potential of Luffa Cylindrica fibers in a biomass packed bed for the treatment of paint industry effluent before releasing into the environment. The fibers were modified by mercerisation in 0.5M NaOH for 24 h. Both modified and unmodified fibers were characterised using Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS). A biomass packed bed was prepared for the study with a packing factor of 0.0617 and 0.0550 for the modified and unmodified fibers respectively. Measured parameters were the pH, colour, total dissolved solids (TDS), total suspended solids (TSS), dissolved oxygen (DO), chemical oxygen demand (COD) and biochemical oxygen demand (BOD). Negative findings were achieved for TSS, DO and COD whilst positive findings were achieved for pH, colour, TDS and BOD. The extended residence time of 48 h was only of advantage for colour and BOD removal. In the domain of the positive results, the untreated fibers achieved 35% colour reduction, 5% TDS reduction and 77% BOD reduction all in 2 h. The treated fibers achieved 35% colour reduction in 30 minutes, 32.5% TDS reduction in 2 h and 82% BOD reduction in 30 minutes. The fibers treated with NaOH performed better in all indices where positive results were achieved except for pH. Luffa cylindrica fibres can be used as effective packing material in a biomass filter for the treatment of paint industry effluent before releasing into the environment based on WHO limits.
Research Article
A New Lipid Rich Microalgal SP Scenedesmus Dimorphus Isolated: Nile Red Staining and Effect of Carbon, Nitrogen Sources on its Physio-Biochemical Components
European Journal of Sustainable Development Research, 2018, 2(4), 43, https://doi.org/10.20897/ejosdr/3911
ABSTRACT: Currently, majority of the researchers concentrate on algal biomass production with autotrophic cultivation, however this cultivation strategy induces low biomass yield and it is troublesome to be utilized in large-scale algal biomass production. In contrary to this, heterotrophic algae can accumulate high level lipid production. Therefore, the present study was aimed to assess the effect of various carbon sources viz., glucose, sucrose, fructose, glycerol, sodium acetate and various nitrogen sources viz., NaNO3, urea, KNO3, NH4NO3, yeast extract, peptone, beef extract on lipid, biomass, total chlorophyll, protein and carbohydrate content in Scenedesmsus dimorphus. Among carbon sources, glucose showed maximum biomass yield (1.98±0.005gL-1) and highest lipid content (32.7±0.01%) followed by fructose, sucrose and glycerol. Similarly, total carbohydrates and protein content was also found to be maximum in glucose 0.275±0.002 mgmL-1 and 0.031±0.001 mgmL-1 respectively. While sodium nitrate supported maximum chlorophyll content (29.00±0.01 µgmL-1). Among various tested nitrogen sources, beef extract showed highest lipid production (30.28±0.05%), biomass yield (1.73±0.02 gL-1) in sodium nitrate and total carbohydrates (0.247±0.008) mgmL-1 in beef extract, followed by yeast extract and peptone. Highest chlorophyll content has been found in urea and maximum protein content in ammonium nitrate.